40mm Chain Control Mechanism Set

40mm Chain Roller Blind Control Mechanism Set

This kit is for manual roller blinds and is compatible with roller blinds with a barrel diameter of 40mm only, and includes the mechanism (chain not included), the pin end and brackets.

To check compatibility, take your existing DotcomBlinds roller blind down from the window and pull the mechanism out of the barrel of the blind. If there are 2 grooves in the mechanism then you have a 40mm diameter barrel, and this mechanism is compatible. If you have 1 groove, then you need a 32mm chain control mechanism set, and if you have 3 grooves you need a 45mm chain control mechanism set.

The pin end is the componentry located on the end of the blind opposite the mechanism. This has a sprung pin that allows for easy removal of the blind from the brackets and simply slides into the barrel.

The brackets are our universal white aluminium brackets that fit a 40mm chain control mechanism only. Bracket covers sold separately.

Features

✔ White PBT plastic componentry,
✔ White aluminium brackets
✔ Easy to fit - simply pull the existing mechanism out of the barrel and slide the new ones in
✔ Discreet design
✔ High load capacity
✔ Smooth operation