Basic Coral BiFold Door Blind

Free Samples?

Your free sample will be added to the basket ready for you to checkout. You can carry on browsing, adding as many samples to your basket as you like. When you’re ready, checkout – delivery is free too – and relax, our samples will be on their way to you in no time.

Why order samples?

We’ve made every effort to accurately portray the fabric realistically, but you can never be too careful.

Quick Turnaround

Right-Size Guarantee

Sometimes you just need some peace of mind when you come to place an order for your blinds. With DotcomBlind’s Right-Size Guarantee you can have just that. With our Right-Size Guarantee we will replace a blind with the correct size if you get the measurements wrong when you order.

Why do I need this Insurance?

We can’t accept returns or provide refunds for blinds that are mis-measured because all of our blinds are made to measure and so the onus is on the customer to get the measurements right for their blinds. Sometimes you might just be having an off-day, get your centimetres and inches mixed up and end up with a blind that is nigh-on useless. With our Right-Size Guarantee we will take that blind back, remake it to the correct size for you and send it back, saving you from having to buy a totally new blind!

How does it work?

✔  Purchase Right-Size Guarantee when you place your order
✔  If one of your blinds has been measured incorrectly, get in touch with us within 14 days and we’ll tell you how to return the blind to us.
✔  Once your blind is with us, we’ll remake it or adjust the blind to your correct measurements and send it back.
✔  Please read our terms and conditions for full details as you will incur additional costs returning the blind to us. 

Pleated Blind Technical Details

The pleated fabric is held at the top by a headrail which is fitted by sliding the tabs under the rubber gasket. The bottom bar is also attached by tabs sliding under the rubber gasket. The headrail, along with the bottom bar and the raise/lower bar comes with white painted hardware as standard but you are able to choose anthracite painted metal.

The blind has cords that are attached to bottom and to the raise/lower bar, which gathers it in and keeps tension as it is drawn. The tension of the cord can be adjusted in the bottom bar.

The width of the blind is measured outside edge of the end cap to the outside edge of the endcap on the otherside, however if you have quite thick rubber gaskets or the measurements are very close to the edge of the gasket or window frame, you may encounter some issues with the metal rivet on the outside of the headrail that controls the cord. Being on the outside of the headrail, this rivet can get pushed into the gasket and this can prevent the cords from moving freely, so please deduct 2mm from your width measurements if you feel that the rivet will be too close to the gasket. This is important to consider as we are not able to adjust your blinds after they've been made.

We allow a +/- 1-2mm tolerance on our window blind deductions when cutting.

Our standard headrail has a depth of 13mm from time to time we may resort to using a slightly deeper headrail at 16mm. We reserve the right to change this without prior notification, and therefore we can only ensure matching hardware sizes if all blinds are ordered together.

Our pleated blinds are held up by their own tension and therefore require relatively strong and rigid rubber gaskets to hold them in place. If your gaskets are quite soft and pliable (or if it’s a bit squishy), then there is a chance the pleated blind won’t be properly supported and can drop. If this is the case for your gasket or you’re not sure, get in touch with our helpful team who can discuss the options available.

You can choose which colour you want the hardware and components for the blind to come in. All of our Bifold Door Blinds come with white painted hardware as standard but we offer a choice of white or anthracite (RAL 7016), allowing you to pair the blind with your door. There is no additional cost for either colour, but please indicate your choice at the time of ordering above.

How to Measure

Measuring your BiFold doors for blinds is super easy. Sit tight, here's a quick guide to help you along your way:

When you look at the window, you’ll see a rubber seal that runs all the way around the glass. This is called a gasket. Take a credit card and push the card’s corner into the gasket to check that you are able to get the blind’s tab under it. For these blinds to work correctly you need a rubber gasket and not a foam gasket. Some gaskets are stuck down and if this is the case, your window isn’t suitable for pleated bifold door blinds.

You will need to measure the visible glass: the width from the inside part of the window where the gasket ends on one side to where the gasket ends on the other – so just measure the visible glass area.

The width of the blind is measured outside edge of the end cap to the outside edge of the endcap on the otherside, however if you have quite thick rubber gaskets (over 1cm deep) or the measurements are very close to the edge of the gasket, you may encounter some issues with the metal rivet on the outside of the headrail that controls the cord. Being on the outside of the headrail, this rivet can get pushed into the gasket and this can prevent the cords from moving freely, so please deduct 2mm from your width measurements if you feel that the rivet will be too close to the gasket. This is important to consider as we are not able to adjust your blinds after they've been made.

Now repeat the method on the length of the window, again measuring up to the rubber gasket. Enter in your measurements above in the Width and Drop boxes. If you think this all sounds too easy to be true, take a look at our video below and you'll see they really are easy-peasy window squeegee!

Differences Between the Basic & Prestige Range

What’s the difference between our Basic and Prestige ranges of bifold door and conservatory blinds? Take a look at the table below!

Features

1 Year Warranty

A blind from DotcomBlinds is made to the highest standards, designed to provide you with years of service and shade.
In fact, we’re so confident and proud of our blinds, we offer a 1 year warranty on our blinds.

Obviously, there are a few exclusions:
✖ Damage caused by poor installation/not following fitting instructions (don’t worry, installation is easy, read this.)
✖ Misuse or Failing to maintain the blind
✖ General wear and tear and fading (these blinds are exposed to very intense UV rays)
✖ Alteration to the blind
✖ Exposure to the elements or fitted in an unsuitable location (these are indoor blinds!)

However, if your blind stops functioning for any reasons other than those listed above, get in touch. Our warranty covers:
✔ Manufacturing defects
✔ Fabric/slat colour fading within a year
✔ Mechanical malfunction
✔ 2 year warranty on battery motors used in electric roller blinds

So, in summary, avoid grossly mistreating your blind, show it a little TLC every so often and don’t use it in ways it wasn’t intended. If you do all those things and something goes wrong with the blind, you’re golden – we’ve got you covered and we’ll and repair or replace it free of charge.