Essence Faux Wood with Ivory Tapes
50mm Slat
Essence Faux Wood with Ivory Tapes Add a touch of warmth to a classic white blind with the Essence Faux Wood Blind with Ivory Tapes. The smooth, off-white slats are paired with decorative 25mm Ivory tapes, creating a subtle tone-on-tone effect that feels sophisticated and considered. Perfect for bedrooms or living areas where you want the practicality of faux wood with a softer, furnished look.

Free Fabric Sample
We want you to feel completely confident in your choice, so we encourage you to order fabric samples. Order a Free Fabric Sample today, and we'll send it via first-class post. You can request up to 10 samples at once, helping you find the perfect match for your space.

Not quite the colour you were looking for? Click here for our full range of Roller Blinds.

Features

How to Install

Step 1

Once you’ve unpacked the blind put it up against the window. Put the spirit level on top of the blind and… you guessed it: make sure it’s level. This is particularly important if it’s going outside a recess where it is hard to gauge a straight line up close. Nobody wants a wonky blind. At this moment it would be a good idea to utilise those extra pair of hands to help hold up the blind if it is quite long. Mark the end of the blind on the wall with a pencil. If you haven’t got a pal who can help, measure the blind on the floor and put the tape measure against the wall and mark it.

Step 2

Grab the brackets and give them a quick once over: one is made to go on the left and one is made to go on the right, so figure out which is which. Make sure the doors opens out and up into the room.
Our brackets can be fixed by either A: Top Fix, B: Face Fix or C: Side Fixed, just choose the one that suits your window best.
Fix the brackets in place using the pencil markings for guidance. Screw the bracket to the wall using the appropriate screws in the right holes. Keep the doors of the brackets open.

If your blind is over 1000mm wide you’ll receive Intermediate Bracket(s). These will need to be spaced evenly along the headrail.

Step 3

Attach the valance clips to the headrail of the blind and space them out evenly. Don’t attach the valance itself yet, but slide the headrail into the bracket (psst… make sure the blind is round the right way with the cords and wand facing you.) Close the door on the bracket and make sure it is locked shut.

Step 4

Offer up the valance to the headrail. You’ll notice the rivet running through the back of the valance; this is what the clip attaches to. Pop the valance onto the clips, bottom first, holding it securely in place. Make sure the edges are attached before you do this if the blind is going outside the recess. The edges are attached using the plastic cornering clip that slides into the rivet.

Step 5

Find the child safety device supplied. Fit the cleat at least 1.5m (60”) above the floor. Keep excess cord out of reach of children. Keep out of reach of children. The cord should be tied around the cleat in full when not in use and never knotted, tied together or looped. Never modify the breakaway device on the cords as it will breakaway if pressure is applied.

1 Year Warranty

A blind from DotcomBlinds is made to the highest standards, designed to provide you with years of service and shade.
In fact, we’re so confident and proud of our blinds, we offer a 1 year warranty on our blinds.

Obviously, there are a few exclusions:
✖ Damage caused by poor installation/not following fitting instructions (don’t worry, installation is easy