• Delivered in 4 to 10 working days.
  • Same Day Dispatch
Delivered in 4 to 10 working days.
Same Day Dispatch

Prestige Raven Honeycomb Blackout BiFold Door Blind

Please Select

  • White Hardware
    White Hardware
    Standard Price
  • Anthracite Hardware
    Anthracite Hardware
  • Black Hardware
    Black Hardware
£ 20.00
- +
order free sample

Delivered in 4 to 10 working days.

Available in Other Colours
Available in Other Colours
  • Aubergine
  • Snow White
  • Jeans
  • Cream
  • Ocean
  • Flame
  • Camel
  • Steel
  • Dawn
  • Pearl
  • Grass
  • Citron
  • Yellow
  • Lipstick
  • Dune
  • Apricot
  • Iron
  • Cloud
  • Melon
  • Eclipse
  • Ash
  • Sand
  • Jaffa
  • Coral
  • Mouse
  • Espresso
Product Description
Product Description

The Prestige Raven Honeycomb Blackout BiFold Door Blind boasts a quick and easy installation coupled with stylish good looks whilst maintaining a robust and well-supported shading system. The Black blackout fabric provides fantastic shading opportunities as well as increased thermal and solar reflective benefits thanks to the honeycomb fabric. Each honeycomb creates an individual pocket of air which helps with insulation. This blackout honeycomb fabric allows light to pass through but it is diffused, much like a lampshade, meaning piercing beams of light are blocked and you can enjoy a warming glow instead.

The Prestige hardware is available in either White, Black or Anthracite. The adhesive strips that run vertically down the sides of the glass are colour matched to the hardware, ensuring a seamless and clean looking finish. The headrail and bottom bar are held in place using the unique clic-fit fixing method, which requires no screws or drills. Simply slide the end tabs into place and click the headrail and bottom bar in to secure, ensuring a perfect fit every time.
Please read the "Geeky Stuff" section below for more information on the product dimensions and other technical specifications.
Want to see the fabric before ordering? Simply order a free fabric sample, and we'll pop it straight in the post for you to see in the comfort of your own home.

Not quite the colour you were looking for? Click here for our full range of BiFold Door Blinds.

The Geeky Stuff!
The Geeky Stuff!

Prestige Bifold Door Blinds Technical Details

The Prestige Bifold Door Blinds consist of a headrail, a bottom bar and a bar attached to the fabric that is used to pull the fabric up and down. Running vertically down each side of the windowpane, next to the gaskets, are 2 self-adhesive strips that colour match the hardware. No screws are required, the blind is held in place by metal brackets that slide under the rubber gasket that runs around the windowpane. These blinds require a gasket depth of 17mm (from frame to glass).

The fabric is fixed to the headrail, meaning this blind is operated from a top-down only method. The fabric can be left at any point down the window thanks to the cords that run from top to bottom. The hardware comes white as standard but you are able to choose anthracite painted metal.

To hold the headrail in place at the top of the window, a self-adhesive strip is fitted to the glass vertically down the window. This strip is 15mm wide and 1mm thick and it is colour matched to the hardware in either white or anthracite.

The headrail and bottom bars measure 19.5mm deep and 15mm high and measure 32mm from glass to the front of the folded operating handle on the bar.

We allow a +/- 1-2mm tolerance on our window blind deductions when cutting.

Our honeycomb and pleated fabrics have an uncoloured reverse, meaning the back of the fabric (the side that faces out of the window) is white.

If you wish to know how much space the headrail and fabric will take up at the top of the window, you’ll first need to know the drop measurement. For every metre on the drop measurement, add 10mm. Take this and add it to 30mmm (the combined height of the top bar and pull down bar) and you’ll have a rough estimate for the size that will be covered when the blind is fully drawn up.

Selecting the Control Type
Selecting the Control Type

Our Prestige Blinds can be operated as either Single or Dual Control.

Single Control makes operating the blind super easy! You use one handle to effortlessly raise the fabric at the top and lower it down the glass. It's like magic! Single control has always been the traditional control method and is the perfect option if you’re somewhat of a traditionalist and require to control your blind top-down.

Now, let's talk about Dual Control, which takes things to a new level of awesomeness! With dual control, you have not one but two handles to play with. One handle lets you move the bottom of the fabric up and down the glass, while the second handle allows you to move the top of the fabric. It's like having a cool dance partner for your blind! Dual control is a game-changer when it comes to adjusting your blinds. It gives you the ultimate power to customize your privacy and shading preferences. So whether you want to let the sunshine in or create a cosy, shaded atmosphere, dual control has got you covered.

Ultimately, the best way to choose the right type of control is to consider your needs and preferences.

Single Control Dual Control
Single Control Dual Control
Fabric Composition
Fabric Composition

Blackout Honeycomb Fabric Composition

Please see below for the fabric composition and specification for our Prestige Honeycomb Blackout blinds.

Composition 100% Polyester
Construction Point bonded non-woven film-laminated fabric
Opacity Blackout
Cell Form D shape
Cell Size 25mm
Weight 169 g/m2
Thickness 0.18mm
Colour Fastness 4 - 5
Metalized (Foil Coated) Yes
Oeko-Tex Standard 100 Yes
Moisture Resistant Yes
PVC/Halogen-Free Yes

Care Instructions

Wipe clean with a damp cloth but do not rub the fabric vigorously or use chemicals. Never iron the fabric. Please ensure any window cleaning chemicals do not come into contact with the fabric and that the window has sufficient ventilation to present condensation spots. As such we do not take responsibility for any fabric damages caused by cleaning materials, excessive moisture or insect excrements.
How to Measure
How to Measure

How to Measure

Prestige Bifold door blinds are held in place by brackets that slide under the rubber gasket and are held against the glass. Take a look at the window. You’ll see a rubber seal that runs around the glass. This is called a gasket (some refer to it as a seal, either way, it’s the rubber “bit” located between the edge of your doors and the glass!)

Use a credit card or butter knife and slide it behind the gasket to check that you can get the blind’s tab under it. This is to replicate the thickness of the bracket used to install this blind. For these blinds to work correctly, you need a rubber gasket and not a foam gasket. Some gaskets are stuck down, and if this is the case, your window isn’t suitable for pleated blinds.

Mark on the card or knife where the gasket reaches and then remove it from the window. Measure from the edge of the card or knife to the mark. This distance needs to be at least 17mm for your window to be suitable. If it is not 17mm, we don’t recommend this type of blind for your window.

Step 1.


Slide a butter knife/credit card behind the rubber gasket.

 

Step 2.


Mark on the knife/card where it natually comes to a stop.
If you have a gasket that measures at least 17mm or more then the Prestige Bifold Door should be suitable for your doors.


Measure the width from the inside part of the window where the gasket ends on one side to where the gasket starts on the other. Repeat this for the top to the bottom too to get the drop measurement.
Please note we will make a 4mm overall deduction to the width of the blind to ensure the rivet is free to move and will not come into contact with the frame.

 

Step 3. Measure Width

Take two measurements of the width, at the top and the bottom of the window.
If there is any variation always use the shortest width to order your blinds. If the windows are particularly large you can take intermediate measurements to check.

Step 4. Measure Drop

Take three measurements of the window drop.
If there are any variations, then always use the longest measurement.
You must measure accurately and to the nearest millimetre to ensure a good fit.
How to Install
How to Install

When you first inspect your new blind please remember that as per the measuring instructions we will deduct 4mm from the width of the blind. This is to allow for free movement of the blind and is essential to the blinds operation. The side channels will compensate for the 4mm deduction.

Step 1 - Fit the brackets.

Fitting your Prestige blind couldn’t be easier...
Place the metal L-shaped bracket flat against the glass, push it towards the window frame ensuring it slides freely under the gasket, and do this for each corner.
Top Tip - A little dab of washing-up liquid can sometimes assist with this. Just be careful to make sure you clean any excess so not to mark the blinds.

Step 2 - Apply Side Profiles.

Position the strip so that the cutouts go either side of the brackets. Ensure it is positioned on the glass and tight up against the gasket (but not on the gasket). If this is not tight up against the gasket, it won’t impede the operation of the blind, but you may see the light bleeding around the edge of the window.

Please note: This strip should be fixed to the glass only once, and it is not designed to be removed and refitted multiple times. Therefore we recommend positioning the adhesive strip to the lugs prior to taking the backing tape off. Replacement strips can be purchased if required.

Step 3 - Install the Blind.

Align the head rail so that the brackets meet the slots on the back of the plastic end caps on the head rail. Push the head rail into place, ensuring it is securely attached to the brackets. Repeat this for the bottom bar. The spring under the bottom bar needs to be in the centre. The cords are intentionally long and should be tucked under the bottom bar. Do not cut them, they can help with tension adjustment if required.

How to operate the blind

Attach the plastic wand by hooking the wand onto the tilt mechanism on the venetian blind. Twist the wand to open and close the slats.

Troubleshooting

Our Prestige blinds function through tension in the cords, and this tension holds the fabric. All blinds come pre-tensioned, and you shouldn’t need to adjust it, but if you find that the fabric/slats aren’t being held in place and are dropping, you will need to adjust the tension.
To do this, locate the spring and cord held in the bottom bar. Use a pen to mark the cord close to the metal clamp with 2 screws. This will indicate how much you have adjusted the tension and allow you to reset it if you go too far.
Undo the screws and either increase or decrease the tension by 1 cm. Tighten the screw and check the blind and repeat as necessary. If the blind becomes too stiff to use, you have over-tensioned and need to release a small amount back.
Hardware Colour Options
Hardware Colour Options

White, Black & Anthracite Hardware Options

You can choose which colour you want the hardware and components for the blind to come in. As standard all our Perfect Fit Blinds come with White painted hardware as standard. However, we offer a choice of Black or Anthracite (RAL 7016), allowing you to pair the blind with your frame.

Right-Size Guarantee
Right-Size Guarantee

Right-Size Guarantee

Sometimes you just need some peace of mind when you come to place an order for your blinds. With DotcomBlind’s Right-Size Guarantee you can have just that. With our Right-Size Guarantee we will replace one blind or curtain with the correct size if you get the measurements wrong when you order. Please note, the Right Size Guarantee excludes Cassette Blinds.

Why do I need this Insurance?

We can’t accept returns or provide refunds for blinds that are mis-measured because all of our blinds are made to measure and so the onus is on the customer to get the measurements right for their blinds. Sometimes you might just be having an off-day, get your centimetres and inches mixed up and end up with a blind that is nigh-on useless. With our Right-Size Guarantee we will take that one blind back, remake it to the correct size for you and send it back, saving you from having to buy a totally new blind! The Right Size Guarantee covers all made-to-measure blinds and curtains except our Cassette Blinds.

How does it work?

✔  Purchase Right-Size Guarantee when you place your order
✔  If one of your blinds has been measured incorrectly, get in touch with us within 14 days and we’ll tell you how to return the blind to us.
✔  Once your blind is with us, we’ll remake it or adjust the blind to your correct measurements and send it back.
✔  Please read our terms and conditions for full details as you will incur additional costs returning the blind to us. 

Shop with Klarna
Shop with Klarna

Buy Now Pay Later with Klarna

DotcomBlinds is pleased to be partnered with Klarna, providing you with more ways to pay.

At the checkout you will see Klarna provides two options: Pay in 3 Instalments or Pay Later.

Pay in 3 Instalments

With Klarna’s option to pay in three instalments, you can spread the cost of your purchase across three interest-free monthly payments.
To pay with Klarna’s ‘Pay in 3 Instalments’ option, you just need to be a UK resident over the age of 18 years old and have a valid payment card.

Pay Later In 30 Days

The second Klarna payment option you’ll find in the checkout is to buy now & pay later with their ‘Pay Later in 30 Days’ option at the checkout.
With this payment option, you make your purchase now and don’t pay until 30 days after we have shipped your product to you, giving you plenty of time to save up!
To pay with Klarna’s ‘Pay Later in 30 Days’ option, you just need to be a UK resident over the age of 18 years old and have a valid payment card.

If you have any questions, please don’t hesitate to get in touch with us.

Next Day Free Samples
Child Safety
Child Safety

Child Safety

Ensuring our products are child safe is a priority for all of us at DotcomBlinds. As a result, our blinds are child safe by design, with built-in safety mechanisms to help reduce the risk of an accident.

Pleated blinds have no chains or cords to operate the blind and the cords used within the blind are internal, with capability for any slack to be gathered up under the blind and tucked out of sight.

If you have any questions around child safety and our blinds, please do not hesitate to get in touch, we're always happy to help.

1 Year Warranty
1 Year Warranty

1 Year Warranty

A blind from DotcomBlinds is made to the highest standards, designed to provide you with years of service and shade.
In fact, we’re so confident and proud of our blinds, we offer a 1 year warranty on our blinds.

Obviously, there are a few exclusions:
✖ Damage caused by poor installation/not following fitting instructions (don’t worry, installation is easy, read this.)
✖ Misuse or Failing to maintain the blind
✖ General wear and tear and fading (these blinds are exposed to very intense UV rays)
✖ Alteration to the blind
✖ Exposure to the elements or fitted in an unsuitable location (these are indoor blinds!)

However, if your blind stops functioning for any reasons other than those listed above, get in touch. Our warranty covers:
Manufacturing defects
Fabric/slat colour fading within a year
Mechanical malfunction
2 year warranty on battery and mains electric motors used in electric roller blinds

So, in summary, avoid grossly mistreating your blind, show it a little TLC every so often and don’t use it in ways it wasn’t intended. If you do all those things and something goes wrong with the blind, you’re golden – we’ve got you covered and we’ll and repair or replace it free of charge.

This blind uses a pull tab operation for simple hand control. To open and close the blind, simply grab the pull tab and move the blind up or down the window.

This blind is available on our Same Day Priority Dispatch Service, which is ideal for when you need a blind in a hurry. By selecting the Same Day Priority Dispatch option at checkout, your blind will jump to the front of our production queue, being made and dispatched that same day when ordered before 11am on weekdays (orders after 11 am or on weekends/bank holidays will be prioritised for the next working day). Please be aware that while most SDPDs are delivered the next working day, we do not guarantee next-day delivery.

This blind is made in the UK in one of DotcomBlinds’ UK factories. By purchasing a blind made right here in the UK you are helping to support the British manufacturing industry. Blinds made in the UK will typically have shorter lead times due to the fact they won’t need to be shipped internationally.

This blind features a thick thermal fabric, which will help provide additional insulation to your home’s windows, making your home more thermally efficient. In winter, these blinds will keep your home warmer by minimising heat loss through your windows, and in summer, they will keep your home cooler by minimising the amount of outside heat that enters your interiors.

This blind features a blackout fabric, proving the light-blocking benefits you would expect from a blackout blind. This fabric will not allow exterior light to pass through it, helping to create a dark environment in your home, which is ideal for bedrooms and home cinemas. Please be aware a minimal amount of light may still leak into a room around the edges of the blind.

This “No-Drill” blind features our Honeycomb fabric, which will provide excellent levels of shading and an enhanced level of insulation to your windows. The honeycomb shaping of the fabric creates small pockets of air which will improve the insulation around your windows.

This blind features a plain fabric with a solid colour. Plain fabrics are incredibly versatile and can easily be matched to the existing decor in your home or add a fresh new colour to your windows. Be sure to order FREE fabric samples to get a feel for the look and feel of the fabric in person before making a purchase.

This “No-Drill” blind can be made with a Dual Control mechanism, which allows you to move the blind from the top and bottom sides of the blind to shade, allowing you to shade individual sections of your windows (unlike our Single Control option which is only “top-down”).

Reviews

We're excited to hear your thoughts on this product, but it looks like no one has shared their review yet. Be the first one to share your thoughts.

PRE-SALE PRICE* - £ 0 - You save £ 0

Highstreet Price Comparison

Our highstreet price comparison calculator works on an average price based on similar made-to-measure blinds sold by highstreet retailers. We compare their blinds to ours using the same measurements, same type of fabric and same mechanism, doing our best to find a like-for-like system. To find out more, click here.