MotionBlinds Single Channel Remote

The MotionBlinds Single Channel Remote is a 1-channel handheld remote control that can be programmed to control one blind, allowing to you raise, lower and stop the blind at any point down the window. A wall-mounted holder is included with the remote as standard.

Hand-held Single Channel Remote - CM-11

1 | Buttons

The center button has two functions: press to stop the blind and hold to move the blind to its favourite position.

2 | Changing the battery

When the indicator is flashing at a high frequency, the battery needs to be replaced with a CR2430 3.0v button battery.

3 | Remote Holder

Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.

4 | Pairing a Remote

4.1 Shortly press the program button on the motor. The blind will start stepping, indicating that the program mode has been activated. (The blind keeps stepping until program mode is deactivated.)
4.2 Press the pair button on the back of the remote control to pair the blind with the remote control. The blind will shortly stop stepping, indicating that the remote has been paired with the blind.